1993 Nissan 240SX Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1993 Nissan 240SX, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1993 240SX — Year-Specific Fitment Context
The 1993 Nissan 240SX is in year 2 of 4 using the 4x114.3 pattern (1992–1995). Wheels from any 1992–1995 Nissan 240SX are cross-compatible with the 1993 model. Across its full production run (1992–1998), the 240SX has also used: 5x114.3.
Nissan 240SX Bolt Pattern by Year
The table below shows how the 240SX's wheel specifications have changed over the years. The 1993 model year is highlighted.
Fitment Notes
The 1993 Nissan 240SX has a bolt pattern of 4x114.3.
This means it is a 4 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Nissan 240SX appears from 1992 to 1998 (7 model years).
Across model years, this model appears with 2 bolt patterns (4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 5.0 mm
4x114.3 Pattern Context
This bolt pattern appears on 169 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x114.3:
1993 Nissan 240SX — Frequently Asked Questions
What is the bolt pattern for a 1993 Nissan 240SX?
The 1993 Nissan 240SX uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 45mm.
What other years of Nissan 240SX have the same bolt pattern as the 1993?
The Nissan 240SX uses the 4x114.3 pattern from 1992 through 1995. Wheels from any of these model years are dimensionally compatible with the 1993, provided the offset and center bore also match.
What is the factory wheel offset for a 1993 Nissan 240SX?
The OEM offset for the 1993 240SX is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Do 1993 Nissan 240SXs use lug bolts or lug nuts?
The 1993 240SX requires N 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 1993 Nissan 240SX?
The factory center bore (hub bore) for the 1993 Nissan 240SX is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 1993 Nissan 240SX use?
The 1993 Nissan 240SX uses N 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
Nissan 240SX has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 1992-1998 (7 model years).
- Observed bolt-pattern variants: 2 (4x114.3, 5x114.3).
- Observed total offset span across years: 5.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1993 Nissan 240SX, please report it via our About page contact so we can verify and update this record.