2026 Toyota RAV4 Prime Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Toyota RAV4 Prime is 5x114.3 (5x4.5"). It has a center bore of 60.1 mm, an offset range of 35-45, and utilizes 12x1.5 (Flat/Mag seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2026 Toyota RAV4 Prime Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 60.1 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 RAV4 Prime — Year-Specific Fitment Context
The 2026 model year is the final year of the Toyota RAV4 Prime's 5x114.3 bolt pattern run (since 2021). Wheels from any 2021–2026 Toyota RAV4 Prime are cross-compatible with the 2026 model.
Toyota RAV4 Prime Bolt Pattern by Year
Looking for all generations? View the complete Toyota RAV4 Prime (2021–2026) Bolt Pattern & Generation Guide →
The table below shows how the RAV4 Prime's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Toyota RAV4 Prime Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Toyota RAV4 Prime, donor rims must match the 5x114.3 PCD and have a center bore of at least 60.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 60.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Lexus ES | 60.1 mm (Exact) | 40 | 12x1.5 (Flat) |
| 2020 Lexus GS | 60.1 mm (Exact) | 35-45 | 14x1.5 (Flat/Mag) |
| 2007 Lexus GX | 60.1 mm (Exact) | 25 | N 12x1.50 (Flat/Mag) |
| 2025 Lexus IS | 60.1 mm (Exact) | 35-45 | 12x1.5 (Flat) |
| 2025 Lexus NX | 60.1 mm (Exact) | 35-45 | 14x1.5 (Flat) |
| 2025 Lexus RC | 60.1 mm (Exact) | 35-45 | 12x1.5 (Flat) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2019 INFINITI Q70 | 66.1 mm | 66.1mm → 60.1mm |
40-50 |
| 2007 INFINITI QX | 66.1 mm | 66.1mm → 60.1mm |
40 |
| 2019 INFINITI QX30 | 66.1 mm | 66.1mm → 60.1mm |
40-50 |
| 2025 INFINITI QX50 | 66.1 mm | 66.1mm → 60.1mm |
35-45 |
| 2025 INFINITI QX55 | 66.1 mm | 66.1mm → 60.1mm |
39-45 |
| 2025 INFINITI QX60 | 66.1 mm | 66.1mm → 60.1mm |
35-45 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Toyota RAV4 Prime — Frequently Asked Questions
What is the bolt pattern for a 2026 Toyota RAV4 Prime?
The 2026 Toyota RAV4 Prime uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mm.
What other years of Toyota RAV4 Prime have the same bolt pattern as the 2026?
The Toyota RAV4 Prime uses the 5x114.3 pattern from 2021 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What is the center bore of a 2026 Toyota RAV4 Prime?
The factory center bore (hub bore) for the 2026 Toyota RAV4 Prime is 60.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 2026 Toyota RAV4 Prime use?
The 2026 Toyota RAV4 Prime uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What does 35-45mm offset mean for the 2026 RAV4 Prime?
An offset of 35-45mm means the wheel's mounting surface is 35-45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
Can I put aftermarket wheels on my 2026 Toyota RAV4 Prime?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-45mm, and a center bore of at least 60.1mm (using hub rings if larger).
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →