2015 Ford Fusion Energi Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2015 Ford Fusion Energi, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2015 Fusion Energi — Year-Specific Fitment Context
The 2015 Ford Fusion Energi is in year 3 of 7 using the 5x108 pattern (2013–2019). Wheels from any 2013–2019 Ford Fusion Energi are cross-compatible with the 2015 model.
Ford Fusion Energi Bolt Pattern by Year
The table below shows how the Fusion Energi's wheel specifications have changed over the years. The 2015 model year is highlighted.
Fitment Notes
The 2015 Ford Fusion Energi has a bolt pattern of 5x108.
This means it is a 5 lug pattern with a circle diameter of 108mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Ford Fusion Energi appears from 2013 to 2019 (7 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
2015 Ford Fusion Energi — Frequently Asked Questions
What is the bolt pattern for a 2015 Ford Fusion Energi?
The 2015 Ford Fusion Energi uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 50mm.
What other years of Ford Fusion Energi have the same bolt pattern as the 2015?
The Ford Fusion Energi uses the 5x108 pattern from 2013 through 2019. Wheels from any of these model years are dimensionally compatible with the 2015, provided the offset and center bore also match.
What is the factory wheel offset for a 2015 Ford Fusion Energi?
The OEM offset for the 2015 Fusion Energi is typically around 50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 2015 Ford Fusion Energi?
Absolutely. Just ensure the aftermarket wheels have a 5x108 bolt pattern, an offset near 50mm, and a center bore of at least 63.4mm (using hub rings if larger).
How do I measure the bolt pattern on my 2015 Ford?
The 2015 Fusion Energi uses a 5x108 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
How tight should I torque the lug nuts on a 2015 Ford Fusion Energi?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Ford Fusion Energi is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2013-2019 (7 model years).
- Observed bolt-pattern variants: 1 (5x108).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2015 Ford Fusion Energi, please report it via our About page contact so we can verify and update this record.