2001 Ford F250 Super Duty Crew Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 Ford F250 Super Duty Crew Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x170 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 124.9 mm |
| Offset (ET) | 40 |
| Torque Specs | 140 ft-lbs (190 Nm) |
2001 F250 Super Duty Crew Cab — Year-Specific Fitment Context
The 2001 Ford F250 Super Duty Crew Cab is in year 3 of 26 using the 8x170 pattern (1999–2024). Wheels from any 1999–2024 Ford F250 Super Duty Crew Cab are cross-compatible with the 2001 model.
Ford F250 Super Duty Crew Cab Bolt Pattern by Year
The table below shows how the F250 Super Duty Crew Cab's wheel specifications have changed over the years. The 2001 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1999 | 8x170 | 124.9 | 40 |
| 2000 | 8x170 | 124.9 | 40 |
| ▸ 2001 | 8x170 | 124.9 | 40 |
| 2002 | 8x170 | 124.9 | 40 |
| 2003 | 8x170 | 124.9 | 40 |
| 2004 | 8x170 | 124.9 | 40 |
| 2005 | 8x170 | 124.9 | 40 |
| 2006 | 8x170 | 124.9 | 40 |
| 2007 | 8x170 | 124.9 | 40 |
| 2008 | 8x170 | 124.9 | 40 |
| 2009 | 8x170 | 124.9 | 40 |
| 2010 | 8x170 | 124.9 | 40 |
| 2011 | 8x170 | 124.9 | 40 |
| 2012 | 8x170 | 124.9 | 40 |
| 2013 | 8x170 | 124.9 | 40 |
| 2014 | 8x170 | 124.9 | 40 |
| 2015 | 8x170 | 124.9 | 40 |
| 2016 | 8x170 | 124.9 | 40 |
| 2017 | 8x170 | 124.9 | 40 |
| 2018 | 8x170 | 124.9 | 40 |
| 2019 | 8x170 | 124.9 | 40 |
| 2020 | 8x170 | 124.9 | 40 |
| 2021 | 8x170 | 124.9 | 40 |
| 2022 | 8x170 | 124.9 | 40 |
| 2024 | 8x170 | 124.9 | 40 |
8x170 Pattern Context
This bolt pattern appears on 157 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 8x170:
Expert Buying Guide for 2001 Ford F250 Super Duty Crew Cab
For your 2001 Ford F250 Super Duty Crew Cab, the 8x170 bolt pattern is shared across 1999–2024 models, ensuring broad cross-compatibility. However, the 124.9mm center bore is critical: aftermarket wheels often have a larger bore (e.g., 130mm), requiring hub-centric rings to prevent vibration and load stress on lug nuts. The recommended offset is 40mm; deviations beyond ±10mm may cause rubbing or clearance issues. Always use 14x1.5 lug nuts with the correct seat type (cone or ball) matching your wheels. Mismatched seats can lead to loosening or wheel failure. Re-torque after 50–100 miles and verify hub-centric fitment for safety.
Historical Fitment Data Reference
In our dataset, Ford F250 Super Duty Crew Cab appears from 1999 to 2024 (25 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings for aftermarket wheels with a larger center bore to avoid vibrations.
- ✅ Re-torque lug nuts to 165 ft-lbs after 50–100 miles of driving.
- ✅ Check for caliper clearance when changing offset, especially with larger brake upgrades.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2001 Ford F250 Super Duty Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2001 Ford F250 Super Duty Crew Cab?
The 2001 Ford F250 Super Duty Crew Cab uses a 8x170 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 40mm.
What other years of Ford F250 Super Duty Crew Cab have the same bolt pattern as the 2001?
The Ford F250 Super Duty Crew Cab uses the 8x170 pattern from 1999 through 2024. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
What is the factory wheel offset for a 2001 Ford F250 Super Duty Crew Cab?
The OEM offset for the 2001 F250 Super Duty Crew Cab is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Will wheels from another Ford fit my 2001 F250 Super Duty Crew Cab?
Only if they share the exact same 8x170 bolt pattern, a compatible offset, and a center bore equal to or larger than 124.9mm.
How do I measure the bolt pattern on my 2001 Ford?
The 2001 F250 Super Duty Crew Cab uses a 8x170 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What does 40mm offset mean for the 2001 F250 Super Duty Crew Cab?
An offset of 40mm means the wheel's mounting surface is 40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset