2002 Ford F250 Super Duty Crew Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2002 Ford F250 Super Duty Crew Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x170 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 124.9 mm |
| Offset (ET) | 40 |
| Torque Specs | 140 ft-lbs (190 Nm) |
2002 F250 Super Duty Crew Cab — Year-Specific Fitment Context
The 2002 Ford F250 Super Duty Crew Cab is in year 4 of 26 using the 8x170 pattern (1999–2024). Wheels from any 1999–2024 Ford F250 Super Duty Crew Cab are cross-compatible with the 2002 model.
Ford F250 Super Duty Crew Cab Bolt Pattern by Year
The table below shows how the F250 Super Duty Crew Cab's wheel specifications have changed over the years. The 2002 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1999 | 8x170 | 124.9 | 40 |
| 2000 | 8x170 | 124.9 | 40 |
| 2001 | 8x170 | 124.9 | 40 |
| ▸ 2002 | 8x170 | 124.9 | 40 |
| 2003 | 8x170 | 124.9 | 40 |
| 2004 | 8x170 | 124.9 | 40 |
| 2005 | 8x170 | 124.9 | 40 |
| 2006 | 8x170 | 124.9 | 40 |
| 2007 | 8x170 | 124.9 | 40 |
| 2008 | 8x170 | 124.9 | 40 |
| 2009 | 8x170 | 124.9 | 40 |
| 2010 | 8x170 | 124.9 | 40 |
| 2011 | 8x170 | 124.9 | 40 |
| 2012 | 8x170 | 124.9 | 40 |
| 2013 | 8x170 | 124.9 | 40 |
| 2014 | 8x170 | 124.9 | 40 |
| 2015 | 8x170 | 124.9 | 40 |
| 2016 | 8x170 | 124.9 | 40 |
| 2017 | 8x170 | 124.9 | 40 |
| 2018 | 8x170 | 124.9 | 40 |
| 2019 | 8x170 | 124.9 | 40 |
| 2020 | 8x170 | 124.9 | 40 |
| 2021 | 8x170 | 124.9 | 40 |
| 2022 | 8x170 | 124.9 | 40 |
| 2024 | 8x170 | 124.9 | 40 |
8x170 Pattern Context
This bolt pattern appears on 157 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 8x170:
Expert Buying Guide for 2002 Ford F250 Super Duty Crew Cab
For your 2002 Ford F250 Super Duty Crew Cab, the 8x170 bolt pattern is shared across 1999–2024 models, but aftermarket wheels must match the 124.9mm center bore precisely. Without hub-centric rings, lug nuts alone cannot center the wheel, leading to vibrations and potential lug failure. Offset is critical: the factory spec is 40mm. Deviating more than ±10mm may cause tire rubbing on suspension or fenders, and can alter steering geometry. Always use 14x1.5 lug nuts with the correct seat type—factory wheels use a cone seat, while some aftermarket wheels require ball or flat seats. Using the wrong seat can cause wheel loosening. Verify lug nut compatibility before installation.
Historical Fitment Data Reference
In our dataset, Ford F250 Super Duty Crew Cab appears from 1999 to 2024 (25 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 165 ft-lbs after 50–100 miles of driving to ensure proper seating.
- ✅ If using aftermarket wheels, always install hub-centric rings (124.9mm ID to wheel's hub bore) to prevent vibrations.
- ✅ Avoid wheels with offset below 30mm or above 50mm to prevent rubbing on brake calipers or fenders.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2002 Ford F250 Super Duty Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2002 Ford F250 Super Duty Crew Cab?
The 2002 Ford F250 Super Duty Crew Cab uses a 8x170 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 40mm.
What other years of Ford F250 Super Duty Crew Cab have the same bolt pattern as the 2002?
The Ford F250 Super Duty Crew Cab uses the 8x170 pattern from 1999 through 2024. Wheels from any of these model years are dimensionally compatible with the 2002, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2002 Ford F250 Super Duty Crew Cab?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What does 40mm offset mean for the 2002 F250 Super Duty Crew Cab?
An offset of 40mm means the wheel's mounting surface is 40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
Will wheels from another Ford fit my 2002 F250 Super Duty Crew Cab?
Only if they share the exact same 8x170 bolt pattern, a compatible offset, and a center bore equal to or larger than 124.9mm.
Can I put aftermarket wheels on my 2002 Ford F250 Super Duty Crew Cab?
Absolutely. Just ensure the aftermarket wheels have a 8x170 bolt pattern, an offset near 40mm, and a center bore of at least 124.9mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset