2013 Ford F250 Super Duty Crew Cab Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2013 Ford F250 Super Duty Crew Cab is 8x170. It has a center bore of 125.1 mm, an offset range of 40, and utilizes 14x1.5 (Cone seat, 22mm hex) fasteners tightened to 140 ft-lbs (190 Nm).
2013 Ford F250 Super Duty Crew Cab Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 8x170 |
|---|---|
| Center Bore (Hub Bore) | 125.1 mm |
| Offset Range (ET) | 40 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 140 ft-lbs (190 Nm) |
2013 F250 Super Duty Crew Cab — Year-Specific Fitment Context
The 2013 Ford F250 Super Duty Crew Cab is in year 15 of 26 using the 8x170 pattern (1999–2024). Wheels from any 1999–2024 Ford F250 Super Duty Crew Cab are cross-compatible with the 2013 model.
Ford F250 Super Duty Crew Cab Bolt Pattern by Year
The table below shows how the F250 Super Duty Crew Cab's wheel specifications have changed over the years. The 2013 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1999 | 8x170 | 125.1 | 40 |
| 2000 | 8x170 | 125.1 | 40 |
| 2001 | 8x170 | 125.1 | 40 |
| 2002 | 8x170 | 125.1 | 40 |
| 2003 | 8x170 | 125.1 | 40 |
| 2004 | 8x170 | 125.1 | 40 |
| 2005 | 8x170 | 125.1 | 40 |
| 2006 | 8x170 | 125.1 | 40 |
| 2007 | 8x170 | 125.1 | 40 |
| 2008 | 8x170 | 125.1 | 40 |
| 2009 | 8x170 | 125.1 | 40 |
| 2010 | 8x170 | 125.1 | 40 |
| 2011 | 8x170 | 125.1 | 40 |
| 2012 | 8x170 | 125.1 | 40 |
| ▸ 2013 | 8x170 | 125.1 | 40 |
| 2014 | 8x170 | 125.1 | 40 |
| 2015 | 8x170 | 125.7 | 40 |
| 2016 | 8x170 | 125.1 | 40 |
| 2017 | 8x170 | 125.1 | 40 |
| 2018 | 8x170 | 125.1 | 40 |
| 2019 | 8x170 | 125.1 | 40 |
| 2020 | 8x170 | 125.1 | 40 |
| 2021 | 8x170 | 125.1 | 40 |
| 2022 | 8x170 | 125.1 | 40 |
| 2024 | 8x170 | 125.1 | 40 |
2013 Ford F250 Super Duty Crew Cab Wheel Interchange & Donor Fitment Guide (8x170)
The 8x170 bolt pattern is shared by 189 vehicles in our database (uncommon). For safe wheel swaps on the 2013 Ford F250 Super Duty Crew Cab, donor rims must match the 8x170 PCD and have a center bore of at least 125.1 mm:
DIRECT HUB MATCH Same 8x170 Pattern & Exact 125.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 1999 Ford F250 Super Duty Super Cab | 125.1 mm (Exact) | 40 | 14x1.5 (Cone) |
| 1999 Ford F350 Super Duty Crew Cab | 125.1 mm (Exact) | 40 | 14x1.5 (Cone) |
| 1999 Ford F350 Super Duty Regular Cab | 125.1 mm (Exact) | 40 | 14x1.5 (Cone) |
| 1999 Ford F350 Super Duty Super Cab | 125.1 mm (Exact) | 40 | 14x1.5 (Cone) |
| 2008 Ford F450 Super Duty Crew Cab | 125.1 mm (Exact) | 0 | 14x1.5 (Cone) |
| 2024 Ford Motorhome Chassis | 125.2 mm (Exact) | Not Applicable | 14x1.5 (Flat) |
HUB RING FITMENT Same 8x170 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2021 Ford F250 Super Duty Regular Cab | 125.7 mm | 125.7mm → 125.1mm |
40 |
Expert Buying Guide for 2013 Ford F250 Super Duty Crew Cab
For your 2013 Ford F250 Super Duty Crew Cab, the 8x170 bolt pattern is shared across 1999–2024 models, ensuring broad cross-compatibility. However, the 124.9mm center bore is critical: aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset is sensitive; the factory 40mm offset maintains correct scrub radius and tire clearance. Deviating significantly may cause rubbing or bearing stress. Always use 14x1.5 lug nuts with the correct seat type—factory wheels use a cone seat, but aftermarket may require ball or flat seats. Mismatched lug nuts can lead to wheel loosening. Verify thread engagement and torque to spec.
Historical Fitment Data Reference
In our dataset, Ford F250 Super Duty Crew Cab appears from 1999 to 2024 (25 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50–100 miles of driving to account for settling.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibrations and hub damage.
- ✅ Check wheel backspacing: factory is around 4.5–5 inches; too little can cause tire rub on suspension components.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
2013 Ford F250 Super Duty Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2013 Ford F250 Super Duty Crew Cab?
The 2013 Ford F250 Super Duty Crew Cab uses a 8x170 bolt pattern (also called lug pattern or PCD). The center bore is 125.1mm and the offset is 40mm.
What other years of Ford F250 Super Duty Crew Cab have the same bolt pattern as the 2013?
The Ford F250 Super Duty Crew Cab uses the 8x170 pattern from 1999 through 2024. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
What is the factory wheel offset for a 2013 Ford F250 Super Duty Crew Cab?
The OEM offset for the 2013 F250 Super Duty Crew Cab is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 125.1mm center bore important for the 2013 F250 Super Duty Crew Cab?
The 125.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Will wheels from another Ford fit my 2013 F250 Super Duty Crew Cab?
Only if they share the exact same 8x170 bolt pattern, a compatible offset, and a center bore equal to or larger than 125.1mm.
Can I use spacers on my 2013 Ford F250 Super Duty Crew Cab?
Yes, but ensure the wheel spacers match the 8x170 bolt pattern and 125.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992–2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →